Youtube



    Paul sellers | dovetail technique part 1

    HD
    51:23
    автор | дата 05.08.2016
    • 203845
    • 2349
    • 44
    Проголосовало пользователей: 2393
    Paul shows a pattern he has developed for making accurate, repeatable dovetails on a project that is so consistent that they are interchangeable. It provides a way of getting evenly sized and spaced dovetails. He then cuts his dovetails using the backer piece and uses a cutting gauge and chisel to mark and remove the pin recesses. To see a step by step version of how to make dovetails for beginner woodworkers, visit our sister site: https://commonwoodworking.com/courses/how-to-make-a-dovetail/ For more information on these topics, see https://paulsellers.com or https://woodworkingmasterclasses.com
    ЕЩЁ
    • СКАЧАТЬ
    автор | дата 27.11.2011
    Paul Sellers makes a dovetail box with mahogany and poplar. To find out more about Paul Sellers or the projects he is involved with go to http://paulsellers.com ...
    • СКАЧАТЬ
    автор | дата 16.10.2017
    This is one of our very early Woodworking Masterclasses series from 2013. In the third episode of this dovetail series Paul finishes the simple chisel tray. Watch it ...
    • СКАЧАТЬ
    автор | дата 14.02.2019
    Paul has come up with an alternative workbench design that matches his original for utility, stability and durability, but which can be made using a bandsaw, ...
    • СКАЧАТЬ
    автор | дата 24.10.2013
    In this video Paul Sellers starts a new mini-series in which he demonstrates how to make a dovetail box. It is a simple project but it is one which shows principles ...
    • СКАЧАТЬ
    автор | дата 11.01.2014
    Do you need a low bench height to bear down on your work when planing? Or should a sharp plane pull itself to task? See what Paul Sellers thinks. We posted ...
    • СКАЧАТЬ
    автор | дата 17.02.2015
    It takes a master woodworker to teach the basics. Watch Paul's every move in this video. He shows every single detail of cutting this essential woodworking joint.
    • СКАЧАТЬ
    автор | дата 21.09.2018
    This is my first week's attempt in vlogging to keep you involved in elements of my life that you might not otherwise see. It's me both behind the videoing and in ...
    • СКАЧАТЬ
    автор | дата 26.10.2018
    A tenoned mitre is a strong corner joint alternative to a mitre that excels for picture or mirror frames and the like. Paul's technique for cutting a tenoned mitre uses ...
    • СКАЧАТЬ
    автор | дата 20.12.2016
    Paul answers some common questions we have received in this tenth Q&A video: 0:14 Bob asks: What would you use to remove sticky stuff from a plane? With a ...
    • СКАЧАТЬ
    автор | дата 21.09.2018
    We're ready to make the drawer with dovetails at the front and housing dado at the back. Paul cuts a rebate on the dovetail section to help with constructing the ...
    • СКАЧАТЬ
    автор | дата 17.10.2016
    We're ready to assemble the door with the hammer and clamp, checking the joints, to get accurate measurements for the panels. Once the panels are cut to size, ...
    • СКАЧАТЬ
    автор | дата 19.01.2018
    Dovetail sizing has a big effect on the strength and appearance of your project. Paul shares some advice on how to size your dovetails depending on the size of ...
    • СКАЧАТЬ
    автор | дата 01.01.2016
    Paul shows a simple method for upholstering a chair. In this first episode, he cuts a piece of plywood to fit into the recess with a small even gap around every ...
    • СКАЧАТЬ
    автор | дата 12.08.2016
    Paul shows a pattern he has developed for making accurate, repeatable dovetails on a project. With the tails cuts, he uses them to layout the pins. Paul uses a ...
    • СКАЧАТЬ
    автор | дата 05.07.2012
    Paul Sellers demonstrates cutting a mortise joint by hand. He is using a method of showing the inside view of cutting the joint previously shown by Peter ...
    • СКАЧАТЬ
    автор | дата 31.10.2014
    In this festive episode, Paul Sellers shows us how to make decorative wooden stars that can be used to cheer up your house, be given as gifts, and used as gift ...
    • СКАЧАТЬ
    автор | дата 08.06.2015
    It takes a master woodworker to teach the basics. Watch Paul's every move in this video. He shows every single detail of cutting this essential woodworking joint.
    • СКАЧАТЬ
    автор | дата 20.11.2011
    Paul Sellers makes a dovetail at a woodworking show with hand tools. To find out more about Paul Sellers or the projects he is involved with go to ...
    • СКАЧАТЬ
    автор | дата 04.01.2019
    When you have been woodworking as long as Paul you have little shortcuts and techniques that you gather and use throughout your woodworking. Here are 10 ...
    • СКАЧАТЬ
    автор | дата 26.09.2016
    Paul discusses the elements involved in making a twist free door and checks and prepares the stock. We then move onto cutting the groove, using a gauge to ...
    • СКАЧАТЬ
    автор | дата 23.04.2018
    In this first episode, Paul covers the stock used and gets going with the layout using a board to get the correct angles for the leg recess. Once the recesses are ...
    • СКАЧАТЬ
    автор | дата 25.07.2015
    This and part two (https://youtu.be/Pqw1lqZO6CA) have been released as part of the celebration of this channel reaching 100K subscribers. Thank you all for ...
    • СКАЧАТЬ
    автор | дата 14.10.2016
    Paul answers some common questions we have received in this fifth Q&A video: 0:16 Chris asks: What level do you go to when preparing stock and what is your ...
    • СКАЧАТЬ
    автор | дата 23.07.2015
    Paul Sellers shows how he sharpens and sets a bench plane in his every day of work. A quick and easy guide to get your plane working. To see a beginner ...
    • СКАЧАТЬ
    автор | дата 11.09.2017
    Paul has developed his own system for cutting mortise and tenon joints using a conventional hand router plane to create perfectly sized mortise and tenons that ...
    • СКАЧАТЬ
    автор | дата 26.01.2015
    Making a wooden mallet is a traditional apprentice piece in which you can practice your mortice and tenons as well as shaping skills. It also provides you with a ...
    • СКАЧАТЬ
    автор | дата 18.04.2017
    When using a bench plane in woodworking, you go through the process of landing and taking off the heel of the plane with every stroke, but not the whole plane.
    • СКАЧАТЬ
    автор | дата 06.09.2018
    Paul decided to make this frame and add it to the giveaway. We are going to release a video soon showing the detailed technique for making this frame joint.
    • СКАЧАТЬ
    автор | дата 18.03.2015
    It takes a master woodworker to teach the basics. Watch Paul's every move in this video. He shows every single detail of cutting this essential woodworking joint.
    • СКАЧАТЬ
    автор | дата 08.04.2013
    Paul Sellers shows how to prepare wood from it's rough sawn state into useable stock. He goes into detail about how to remove twist from a square piece of ...
    • СКАЧАТЬ
    автор | дата 02.10.2017
    This is one of our very early Woodworking Masterclasses series from 2013. In this first episode, Paul shows how to prepare the wood and cut the tails for the ...
    • СКАЧАТЬ
    автор | дата 15.01.2016
    Need some tips on the best steps to take to restore a bench plane? Whether it is rusty from disuse or as good as new, Paul shows what he does to get a plane ...
    • СКАЧАТЬ
    автор | дата 11.01.2019
    Do you think about vibration when you are woodworking? If not, you probably should. In this video, Paul explains why vibration is something you should try to ...
    • СКАЧАТЬ
    автор | дата 12.01.2018
    Once the legs and rails are cleaned up and the rail tenons finessed, the leg frames are glued up. Then the bearers are screwed into the top of the leg frames, ...
    • СКАЧАТЬ
    автор | дата 03.03.2017
    Paul answers some common questions we have received in this twelve Q&A video: 0:03 James asks: How do I develop the skill of fitting a joint? How do I drive ...
    • СКАЧАТЬ
    автор | дата 30.09.2016
    Paul answers some common questions we have received in this fourth Q&A video: 0:09 KC asks: Can you provide some project ideas to do with kids using ...
    • СКАЧАТЬ
    автор | дата 03.10.2016
    It's time to mark the gauge lines for the tenons of the rails. Then Paul shows a few techniques for cutting the tenons using a combination of the saw and chisel, ...
    • СКАЧАТЬ
    автор | дата 14.09.2018
    How do you go about adding a drawer to a workbench? First step is to cut the hole in the apron and then build the framework to support the drawer. For more ...
    • СКАЧАТЬ
    автор | дата 19.08.2016
    Paul answers some common questions we have received in this first Q&A video: 00:13 Micah asks: When would you use twin tenons and double tenon and what ...
    • СКАЧАТЬ
    Популярные тэги
      Сейчас смотрят
      Пользователи
      • Katherine Pierce Katherine Pierce
        London
      • Катя Кривальчук Катя Кривальчук
      • Jandos Samekenov Jandos Samekenov
        Уральск
      • Ростя Орсагош Ростя Орсагош
        Великие Лучки
      • Игорь Ларичев Игорь Ларичев
        Москва
      • Camilla Camilla Camilla Camilla
      • Royal Ceramics Royal Ceramics
        Москва
      • Fatih Ak Fatih Ak